![]() ![]() Test as Mitch advices with a test light is real guick and them track circuit by pulling fuses. battery causing it do go dead quickly.light left on, solenoid stuck.ect. a draw pulls extra power from the supply.i.e. you have a draw.not a short, a short will blow fuses and or melt wires, caused by hot/ground wire touching, pinched hot wire to metal.ect. Sometimes, it's easiest to just replace that whole wire run, like if it's the power wire to the fish finder, and wire it directly to the battery cut off switch. It can be a tedious task, but at least you have a starting place. If it's not a MAJOR circuit, I'd run with it for a day and see if your problem still exists. Now you have to start checking all connections in that circuit. Test all of them just to make sure you only have one bad circuit. When the light goes out, that's the circuit that is bad somewhere. If the light stays on, replace that fuse and go to the next one. So, now go to your fuse box and pull the fuses out one at a time. I use a hose clamp and stick the point between the terminal and the clamp. If the light comes on, then you have a short somewhere. Use a test light by removing the Neg battery terminal and then hook the alligator clip to the wire and touch the neg post with the point of the light. Credit to for the info which can be found here: https. Malfunctioning sensors, such as temperature sensors, motion sensors, or oxygen sensors, can disrupt various systems in your vehicle, leading to increased power consumption and ultimately draining the battery. Mitch wrote:Test for a short circuit first. This solution has 99 fixed modern standby battery drain on my Windows 10 and 11 devices. In short, the answer is yes, a bad sensor can drain a car battery. Kayak, Kick Boat, and Belly Boat Anglers. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |